To reset base.
Hold Page button while powering on. Keep held until all lights are solid green.
Wait 5mins and then reboot.
Register Handset.
Hold Page button for 2 seconds.
On handset press ok and 'Register Handset'
Scan for base.
Default PIN is 0000
Once registered use settings to locate IP address of Base station.
Connect to this IP address
Default credentials are admin/admin
Once logged in upgrade firmware to 25.81.xx.xx or higher
after upgrade http to the device.
Check TIme zone is correct.
Add Stun Provision address in the settings tab.
Clear password field!!
Press confirm to save settings.
Now press auto-provision and wait......
To Register Second Handset
Go To Accounts > Register
Enable extension
Give Name
Login Info is on the Provision tab.
Username = Extension Number
Server address is aspiretrust.3cx.co.uk default port
timeout = 120
Aditional STUN settings if DECT station will not register
NETWORK > NAT >STUN Server/STUN Port
